To use bar code functions in Superbase, first you must load our Superbase bar code library CIAXCOM.SBP
There are two methods;
The manual method can be used when you are tested reports;
- Select menu Program | Load...
- Select file CIAXCOM.SBP
This example loads library CIAXCOM.SBP if it is not already loaded;
SUB main() ... REM Load library CIAXCOM.SBP, if not already loaded IF NOT PROGRAMFILE ("CIAXCOM") THEN LOAD "C:\JITSBP\CIAXCOM", NEW END IF ... END SUB
Now your programs can use the bar code functions in CIAXCOM.SBP
Copyright © 2000 CIA (BAR CODES) UK. All rights reserved. Reproduction prohibited.